Description
This 7” LED ceiling light has a low-profile design and is less than one inch in depth. It is a motion sensor LED disk light featuring a PIR motion sensor that automatically turns the light on when sensing motion within an 5.5 ft. radius (mounted at a 10 ft. height). It has a 5 CCT switch with selectable color temperatures of 2700K, 3000K, 3500K, 4000K and 5000K. It also features a dusk to dawn sensor and standby dimming capabilities. This LED round panel light features driver-on-board technology and can be easily mounted onto a 4" standard junction box or you can utilize the provided E26 quick connector and torsion springs in a 5” or 6” recessed can. They can be installed in damp locations and are great for stairways, hallways, garages, basements, corridors, laundry rooms and other areas where you want a finished look with the additional benefits of motion activated light. This motion sensor ceiling light is made with a polycarbonate trim and lens, which distributes light evenly throughout the area. It provides 1200 lumens of light while using only 13 watts of energy, equivalent to a 90W incandescent light. It is ETL Listed and comes with a 3-year warranty.
Product Specifications
| Model | MCL-6071305 |
|---|---|
| Manufacturer | Maxxima |
| Light Type | LED Ceiling Fixture |
| Color | White |
| Shape | Round |
| Qty Pack Size | Single Pack |
| Case Pack Qty | 6 |
| Watts | 13 |
| Watts Equivalent | 90 |
| Brightness | 1200 Lumens |
| CRI | 90 |
| Lifetime Hours | 50000 |
| Dimmable | No |
| Dimming Type | N/A |
| Dimmable via Dial | No |
| Dimmable via App | No |
| Beam Spread | 110° |
| ETL Listed | Yes |
| Suitable For | Damp Locations |
| Sensor Type | Dusk-to-Dawn Sensor|Motion Sensor |
| Depth | 0.89″ |
| Diameter | 8.22″ |
| Weight | 1 lb |
| Voltage | 120V AC |
| Warranty | 3 Years |
| Finish | Matte |
| Lens Type | Frosted Lens |
Additional Information
- 5 CCT Select 2700K/3000K/3500K/4000K/5000K (switch on side of trim)
- PIR Motion Sensor, D2D and Standny Dimming
- Detects motion from up to 5.5 ft when mounted at 10 ft height
- Switch in Off position- sensors are deactivated and fixture works with a wall light switch
- Switch in Bi-level position- Both PIR & D2D sensors are active. When motion is detected in the dark, the light will turn on to full brightness. When no motion is detected for 30 seconds the light will go to standby dimming mode at 20% brightness.
- Switch in On/OFF position- Both PIR & D2D sensors are active. When motion is detected in the dark, the light will turn on to full brightness. When no motion is detected for 30 seconds the light will shut off.
- Can be installed on a standard junction box or you can use the retrofit option with the provided e26 quick adapter and torsion springs in a 5 or 6 inch recessed can
- Fully integrated LED disk light (no bulb required)
- Can be installed in damp locations
- Material: Polycarbonate trim with polycarbonate lens
- Low profile round flush mount light
- 8.22" diameter x 1" height
- 10.5” wire length
- Mounting hardware included
- Driver-on-board technology
